Type of Engine – Petrol
Mobil 1 0W-30 is engineered with a proprietary blend of high performance synthetic basestocks fortified with a precisely balanced additive component system. The low viscosity, fully synthetic formulation helps to increase engine efficiency and offers outstanding fuel economy. Mobil 1 0W-30 provides the high-temperature protection of 5W-30 and 10W-30 oils while offering improved fuel economy.
Key Features
- Helps to improve fuel economy based on 0.2-2.3% potential fuel economy improvement obtained by switching from higher viscosity oils to a 0W-30 grade. Actual savings are dependent upon vehicle/engine type, outside temperature, driving conditions and your current engine oil viscosity
- Help to reduce oil aging resulting in long lasting protection
- Quick cold weather starting and fast protection helps extend engine life
- Excellent overall lubrication and wear protection performance for many driving styles and conditions, from mild to severe, where a 5W-30, 10W-30 or 0W-30 is recommended
Applications
Mobil 1™ 0W-30 is an advanced full synthetic engine oil designed to help deliver outstanding engine protection and enhanced fuel economy. Mobil 1 0W-30 meets or exceeds the requirements of the latest industry standards and outperforms our conventional oils.
Mobil 1 0W-30 is recommended by ExxonMobil for SAE 0W-30, 5W-30 and 10W-30 applications in all types of modern gasoline fueled passenger cars, SUVs, vans and light trucks.
- Mobil 1 0W-30 is engineered to help deliver outstanding engine protection and improved fuel economy.
- Mobil 1 0W-30 is recommended for extreme cold conditions to help deliver quick starts and fast lubrication.
- Mobil 1 0W-30 is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer.
Typical Properties
| SAE Grade | 0W-30 |
| Viscosity @ 100ºC, cSt (ASTM D445) | 10.9 |
| Viscosity, @ 40ºC, cSt (ASTM D445) | 62.9 |
| Viscosity Index | 166 |
| Phosphorous (ASTM D4951) | 0.065 |
| Sulfated Ash, wt%, (ASTM D874) | 0.9 |
| HTHS Viscosity, mPa•s @ 150ºC (ASTM D4683) | 3 |
| Flash Point, ºC (ASTM D92) | 226 |
| Pour Point, ºC (ASTM D97) | -50 |
| Total Base Number (ASTM D2896) | 9.1 |
| MRV @ -40 ºC (ASTM D4684) | 13,250 |
| Density @15.6 ºC, g/ml (ASTM D4052) | 0.842 |
